Stainless Steel Rods

Product Details:

15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shapes.

Product Details:

Consequently, we are known as one of the reliable SS316 Round Bars suppliers & exporters from Chennai. With respect to national and international quality of raw materials, We also offer these pipes in customized size and thickness as per specific demands by our esteemed clients at market Leading prices.

Additional Information:

• Item Code: ss316L
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Chennai

Product Details:

316 Stainless Steel316 Stainless Steel - used for food and surgical stainless steel. Also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 304. 316L is an extra low carbon grade of 316, generally used in stainless steel watches. Its resistance to chloride attack means it is often selected for use in marine atmospheres. 316Ti includes titanium for heat resistance, therefore it is used in flexible chimney liners.316 stainless steel is a molybdenum-bearing grade. This addition gives the better overall corrosion resistance properties than type 304 and higher creep strength at elevated temperatures.

Product Details:

Stainless Steel 304/304L Round RodsRagavendra Engineering is an exceedingly manufacturer, exporter, stockiest and supplier of Stainless Steel 304 Round Bars and SS 304/304L/304H Round Bars and Rods that are being sourced by using dominating nature of rough material.With respect to a couple of stainless steel audits, these Stainless Steel 304 Round Bars and Rods is the common 18/8 in the gathering of stainless. The specification includes fantastic welding performance and impartial austenitic structure, these stainless steel 304 Rods is for the most part used as a part of transportation and modern machines.Stainless Steel 304L Round Bars and Rods has a significant measure of the similar mechanical characteristics of SS 304, however this particular audit is extra low-carbon dissimilarity. It is also known as S30403, these Stainless Steel 304L Round Bars has most outrageous measure of carbon substance that disposes of the carbide precipitation that comes in the midst of the welding system. For the reason of these qualities, these Stainless Steel 304L Rods can be used as a piece of welded state, even in enormously ruinous structures.

Product Details:

We are the leading Supplier of Stainless Steel 304 Rods from chennai.
Ragavendra Engineering of 304 and 304L Stainless Steel in a wide range of bar, flat, sheet, plate, angle and seamless tubing and pipes. Reliable local and nationwide delivery.
Stainless steel types 304 and 304L. Type 304 is the most versatile and widely used stainless steel. It is also known as 18/8 from the nominal composition of type 304 being 18% chromium and 8% nickel.
The most versatile and widely applied of the 300 series Stainless Steels. It has excellent forming and welding characteristics. AISI 304 stainless can be deep drawn more severely than Types 301 and 302 without immediate heat softening, a characteristic that has made this grade dominant in the manufacture of drawn stainless steel parts such as sinks, splashbacks and saucepans.
Type 304 stainless steel also has outstanding welding characteristics. Post-weld annealing is not required to restore the excellent performance of this grade in a wide range of mildly corrosive conditions.
Type 304L does not require post-weld annealing and finds extensive use in heavy gauge components where freedom from carbide weld precipitation is often required.

Product Details:

430F stainless steel round bars Manufacturers & Supplier, Distributors of 430F stainless steel round bars in Chennai
430F Stainless Steel Bar 430F Rod 430F Hex leading manufacturer supplier stockist in India, SS 430F Tee bars, SS 430F Bright round bars, SS 430F square bars, SS 430F hexagon bars, SS 430F Bright flat bars, SS 430F Peeled & Polished Bar, Hexangular Stainless Steel 430F Bars/Rods, SS 430F Roll Bar, 430F Stainless Steel Cold Rolled Bright Bars, 430F Stainless Steel Triangle Bar, stainless steel 430F shaped bar, ASTM A276 430F stainless steel round bars suppliers, extensive stocks of SS 430F Bar, SS 430F Stainless Bar, SS 430F Rod, SS 430F Hex Bar, SS 430F Flat Bar, SS 430F Angles, Inox 430F round bars, SUS 430F round bars

Product Details:

We are the leading Supplier of Stainless Steel 316l Rods from chennai
The 316 stainless steel round rod has an unpolished (mill) surface, has been annealed, meets American Society for Testing and Materials International ASTM A276 specifications, and has a standard tolerance. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

Chemical composition of SS316 and SS316L

 

From the above table we can see that SS316L has a 0.03% max carbon where as SS316 has a 0.08% max carbon. The low carbon in SS316L improves its wediability at high temperature. In a corrosive environment,SS316L used to minimize intergranulor corrosion

Product Details:

We are offering SS 316/316l Rod;

Minimum Order : Customer Requirement;
FOB Price : Rs. 300/-
Supplier ability : 500 Tons / Tons per week;
Payment Terms : L/C, T/T;
Material : SS 316 / SS 316L Rod;
Standard : ASTM / AISI / JIS / DIN / GB
Length : Cutting for customer Requirement
Hot Rolled Stainless Steel plate;
Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

Product Details:

Our company is one of the distinguished exporters and traders of Stainless Steel 17-4 ph. We have team of quality inspectors, who check the quality of the product at regular interval of time and ensure to offer the same without being damaged. These finds applications

• Oil field valve parts
• Chemical process equipment
• Aircraft fittings
• Fasteners
• Pump shafts
• Nuclear reactor components
• Gears
• Paper mill equipment
• Missile fittings and
• Jet engine parts

Available forms are

• Seamless pipe
• Welded pipe
• Seamless tube
• Welded tube
• Bar
• Wire
• Sheet
• Plate
• Forgings
• Pipe fittings and
• Flanges

Specifications : AMS 5604

 

Chemical Analysis :

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Chennai
• Production Capacity: 1 ton per month import from europe and usa
• Delivery Time: Immediate
• Packaging Details: P&F at actual and sales tax applicable

Product Details:

We are the leading Supplier of Stainless Steel 317 and 317l from ChennaiWith our trained professionals, we are able to supply Stainless Steel 317 and 317L at best price. These professionals also check the quality of the product at regular interval of time. Further, ensure to offer these without being damaged by checking them before and after dispatching.


Specifications :
UNS S31700, ASTM A 240, ASME SA-240

Chemical Composition, %

Ni Cr Mo Mn Si C N S P FeMIN 11.0 18.0 3.0 - - - - - - -MAX 15.0 20.0 4.0 2.0 0.75 0.03 0.1 0.03 0.045 Balance

Features :
Improved general and localized corrosion to 316/316L stainlessGood formabilityGood weldability

Applications :
Flue gas desulfurization systemsChemical process vesselsPetrochemicalPulp and paperCondensers in power generation

Physical Properties :

Density: 0.285 lb/inch3Melting Point: 2540 - 2630°FPoisson''s Ratio: 0.3Electrical Resistivity: 475 Ohm-circ mil/ft70°F to indicated temperature.

Temperature, °F 70 212 392 572Coefficient* of Thermal Expansion, in/in°F x 10-6 - 9.2 10.1 10.8Thermal ConductivityBtu • ft/ft2 • hr • °F 7.8 - - -Modulus of Elasticity Dynamic, psi x 106 29 - - -

Product Details:

310 Stainless Steel Round Rod SuppliersRagavendra Engineering is one of India’s leading manufacturers of high quality Stainless Steel 310 Round Bars, Rods which find application across diverse sectors. 310 stainless steel bars contains the following primary elements: .25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% chromium, 19% to 22% nickel, traces of sulfur and phosphorus, with the balance being iron. Grade 310 is superior in most environments to 304 or 309 due to its relatively high chromium and nickel content. SS 310 Seamless Bars exhibits a combination of good strength and corrosion resistance in temperatures up to 2100° F. Meanwhile, cold working in SS 310 Welded Round Bars will cause SS 309 to increase in hardness and strength, and it does not respond to heat treatment. Also known as UNS S31000, these SS 310 Round Bars is considered the most versatile, most widely used, and is available in more forms and finishes than any other grade of stainless steel.

Product Details:

Stainless Steel Round RodThese Stainless Steel materials offered by us are used in various industries for multiple applications. These include sheets, coils, fittings and others. Our steel caters to the requirements of various industries such as construction, metal works, and automobile. Our products are widely appreciated in the market for its competitive prices and for their durability and corrosion resistant surface.Western Steel Agency supplies SS Round Bar that available in different diameters and specifications. We stock large range of all type of bars. We are major supplier of stainless steel round bars for many small and large scale industries. We believe in quality and we strive to provide exceptionally good quality bars and other stainless steel products to our domestic and international clients.Grades: 303, 304, 304L, 310, 316, 316L, 316TI, 321, 347, 410, 420, 430F, 440C.

Product Details:

We are the Largest Stockists & Manufacturer of Stainless Steel 304 Round Bars. This Round Bars are manufactured using the best quality raw material in hand in hand with the Latest Hi-Tech Manufacturing Machine & Skilled Labour. This Stainless Steel 304 Round Bars are very good in resistance.The 304 stainless steel grade has less carbon than 304 stainless steel, offering better corrosion resistance after welding or stress relieving. It is a common choice when the material cannot be annealed after it has been welded. An austenitic stainless steel, 304 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability.304/304L Stainless Steel Round, is ideal for all applications where greater strength and superior corrosion resistance is required. 304 Stainless Round has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements - chemical, acidic, fresh water, and salt water environments.

Product Details:

We are the leading Supplier of 304 Stainless steel rods from chennai
The 304 stainless steel round rod has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 5639 and QQ-S-763 and American Society for Testing and Materials International ASTM A276 specifications, and has a standard tolerance. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagentic but may become slightly magnetic when cold worked. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.
Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.
Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.


Product Features
304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formabilityUnpolished (mill) surface has no finishMeets AMS 5639, AMS QQ-S-763, and ASTM A276 specificationsAnnealed after shaping to modify the metal's propertiesStandard tolerance

Product Details:

15-5 PH STAINLESS STEEL BAR15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.

Product Details:

We are the leading Supplier of SS 430F Rod from chennai.
Ragavendra engineering is engaged in offering a wide range of S.S.430F Honed Tubes that is widely used across the industry. These are known for their sturdy designs, resistance against corrosion and durability. Our SS 430F Honed Tubes is widely used due to their features such as durability, precise construction, flawless finish, high tensile strength and performance. These SS 430F Honed Tubes are available at industry''s leading rates which is another important feature exhibited by our products range. In addition, these SS 430F Honed Tubes are widely appreciated for their flawless finish, extreme durability, high tensile strength, precise construction and optimum performance. Our range SS 430F Honed Tubes is available in different shapes and dimensions meet the necessities of the clients accordingly.

Grade 430F is the free-machining version of this grade, available in bar form for usein automatic screw machines. Grade 434 is the molybdenum bearing version of Grade 430 and has the same useful combination of properties. Its molybdenum addition improves corrosion resistance.Key Properties
These properties for 430 are specified for flat rolled product (plate, sheet and coil) inASTM A240/A240M. Similar but not necessarily identical properties are specified forother products such as forgings and bar in their respective specifications. Properties
of Grade 430F are specified for bar in ASTM A582.Composition
Typical compositional ranges for grade 430 stainless steels are given in table 1.Table 1.Composition ranges for 430 grade stainless steel
Grade C Mn Si P S Cr Mo Ni N 430 min. max. - 0.12 - 1.00 - 1.00 - 0.040 - 0.030 16.0 18.0 - - 0.75 - 430F min. max. - 0.12 - 1.25 - 1.00 - 0.06 0.15 - 16.0 18.0 - - - Mechanical Properties
Typical mechanical properties for grade 430 stainless steels are given in table 2.Table
2.Mechanical properties of 430 grade stainless steelHardness Grade TensileStrength(MPa) min Yield Strength0.2% Proof (MPa) min Elongation(% in 50mm)min RockwellB (HR B)max Brinell(HB) max 430 450 205 22 89 183 430F 552 typical 379 typical 25 typical - 262 Physical PropertiesTypical physical properties for annealed grade 430 stainless steels are given in table3.Table
3.Physical properties of 430 grade stainless steel in the annealed conditionMean Coefficient of ThermalExpansion(μm/m/°C) ThermalConductivity(W/m.K) Grade Density(kg/m3) ElasticModulus(GPa) 0-100°C 0-315°C 0-538°C at100°C at500°C SpecificHeat 0-100°C(J/kg.K) Electrical Resistivity(nΩ.m) 430 7750 200 10.4 11.0 11.4 23.9 26.0 460 600 430F 7750 200 10.4 11.0 11.4 26.1 26.3 460 600

Product Details:

Stainless steel grade 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. This steel is known for its good corrosion resistance and formability, coupled with practical mechanical properties. It can be used in certain chemical applications due to its resistance to nitric acid.
Grade 430F stainless steel is usually provided in bar form to be used in automatic screw machines.Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties.Its ability to resist nitric acid attack permits its use in specific chemical applicationsbut automotive trim and appliance components represents its largest fields of application.Grade 430F is the free-machining version of this grade, available in bar form for usein automatic screw machines. Grade 434 is the molybdenum bearing version of Grade 430 and has the same useful combination of properties. Its molybdenumaddition improves corrosion resistance

Product Details:

We are SS316l Rod Supplier in Chennai

Minimum Order : Customer Requirement.
FOB Price : Rs. 318/
Supplier ability : 50 Tons / Tons per week.
Payment Terms : L/C, T/T.
Material : SS 316L Rod.
Standard : ASTM / AISI / JIS / DIN / GB.
Length : Cutting for customer Requirement.
Hot Rolled Stainless Steel plate.
Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

Product Details:

Our company is one of the distinguished supplier, trader and wholesaler for stainless steel raw material(ss bars,ss sheet,ss pipes) industrial tools and equipment. We fabricate in compliance with industrial quality standards.

Product Details:

Stainless Steel 316Ti Round Bars
Ragavendra Engineering is one of the well-established distributors and supplier of SS 316Ti Round Bars, which often required strengthening because of its low – annealed strength and also tempering is often required to improve hardness and elasticity. Our Stainless Steel 316Ti Square Bars is additionally poor in the area of oxidation resistance; however, it is excellent under stress and corrosion in a variety of salt water, fresh water, brackish water and hydrochloric environments. This Stainless Steel 316Ti Flat Bars offers the same corrosion resistance as nickel, but often is chosen because of its reduced cost and much higher ability to withstand pressures and temperatures. Combined with its high workability and strength, our Stainless Steel 316Ti Threaded Bars is often chosen for engineering applications. Additionally, these Stainless Steel 316Ti Hollow Bars is nonmagnetic, and the chromium component of its makeup also provides better resistance to oxidation than pure nickel. Our Stainless Steel 316Ti Hexagonal Bars can only be hardened by cold – working practices, making it ideal for welding, brazing and soldering. These Stainless Steel 316Ti Triangular Bars is also all but immune to chlorine, where its flexible nature is due largely in part to its ability to withstand corrosion. Our Stainless Steel 316Ti Bars is capable of keeping its structural integrity under a number of conditions. These Stainless Steel 316Ti Rods is applicable across a wide range of temperatures and environments, remaining resistant to neutral and alkaline conditions.

Product Details:

We are the leading Supplier of Stainless Steel Grade 304L from chennai
Our client’s from the various verticals can avail Stainless Steel - Grade 304L. We offer this at reasonable prices by meeting industrial quality standards. Further, these are offered with


Type 904L Stainless Steel is the most common grade of stainless steel, most likely due to its high level of corrosion resistance and resistance to oxidation at a continuous exposure to 1650° F
It is interesting to note that the 630 foot-tall Gateway Arch of St. Louis, Missouri was constructed with this highly formable grade of stainless steel
It is best to full anneal type 304 Stainless Steel quickly after fabrication for relief of stress caused by forming

Chemical Composition %


C Cr Cu Mn Mo Ni P S SiMax Max Max Max Max0.02 19.0-23.0 1.0-2.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0

Product Details:

Our company is one of the distinguished supplier, trader and wholesaler for stainless steel raw material(ss bars,ss sheet,ss pipes) industrial tools and equipment. We fabricate in compliance with industrial quality standards.

Product Details:

tainless Steel 304 Round Bars and Rods Supplier
Stainless Steel 304, Ragavendra Engineering is Our company supplies wide assortment of Stainless Steel Bar, varying in size, length and dimensions. We procure these from reliable manufacturers by testing at graduated time to ensure rust resistant. Our clients can avail these at reasonable prices. Further, Stainless Steel Bar are valued for Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a "quench-and-temper" heat treatmenWe trade Stainless Steel Grades across world wide at market leading prices. Our products are widely used in various industries such as Marine, Engineering, Mechanical and many more. We procure Stainless Steel Specialist Grade from reliable manufacturers at best price to ensure durability. Moreover, we also offer variegated range such as Stainless Steel - Grade 904L, Stainless Steel XM-19 / Nitronic 600, NAS 660 (UNS S66286) - A-286 Alloy.

Product Details:

Our company is one of the distinguished supplier, trader and wholesaler for stainless steel raw material(ss bars,ss sheet,ss pipes) industrial tools and equipment. We fabricate in compliance with industrial quality standards.

Product Details:

Best Stainless is also a supplier of stainless steel hex bar or hexagon bars in grades 304/304L, SS 316/316L, 17-4 PH SS, 410 SS and 416 SS. We sell less than full lengths and can cut to your specific needed size. We’ve been trusted for years as a leading supplier of round bars and we can provide the same great service for your stainless steel hex bar needs. We also offer a variety of other stainless steel shaped bars.
Stainless Steel Hex Bar Grades17-4 PH304/304L316/316L410

Product Details:

Manufacturer & Exporter of Stainless Steel 316Ti Round Bars , SS 316Ti Bright Bars, Steel 316Ti Rods, 316Ti Hexagonal Bar Suppliers in India.
Stainless Steel 316Ti Round Bars Supplier We are manufacturer & exporters of a vast range of SS 316Ti Round Bar. It is available in various sizes, shapes, dimensions and finishes. All our items can resist high pressure and temperature applications and require less maintenance. Our entire range is developed exclusively by making use of global class raw material and current technologies.
Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels.The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics.

Product Details:

Stainless Steel 303 Round RodRagavendra Engineering is one of the well-established trader and dealer of SS 303 Round Bars, which is available in shaped squares, flats and diamonds sized per customer requirements. Very low carbon content of our Stainless Steel 303 Square Bars and improving the ratio increases the stability and structure of the largest anti – allergy activity and resistance to inter – granular corrosion. Low temperature of these Stainless Steel 303 Flat Bars is done annealing around 950 Degree C guaranteed fine grain structure. Our Stainless Steel 303 Threaded Bars has long been used in the heat treating industry for many of the same applications as RA330. These Stainless Steel 303 Hollow Bars has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Our Stainless Steel 303 Hexagonal Bars is not suggested for use at red heat when sulphur is present due to elevated nickel quantities. Found in applications that demand high temperature resistance, other major design features of these Stainless Steel 303 Triangular Bars include similar resistance and corrosion protection as Alloy 304. Welding of our Stainless Steel 303 Bars is difficult, and best performed on material in the solution annealed condition. These Stainless Steel 303 Rods is an age hardening nickel base super – alloy with useful strength at temperatures up to 1400 Degree F – 1600 Degree F, and good oxidation resistance in gas turbine engine atmospheres up to 1600 Degree F.

Product Details:

Stainless Steel 303 RodsRagavendra Endineering, the leading stainless steel round bar manufacturer in India, is catering invariably all industrial applications. With state of the art technology heat treatment facilities and quality control, SS round bars of size ranging from 1.60 mm (1/16”) to 152.4 mm (6”) of lengths up to 7.6 meters (25 feet) are manufactured conforming strictly to the client specification.We manufacture round bars of ferritic, austenitic, and martensitic stainless steel conforming to AISI 303, 304, 304L, 316, 316L, 316Ti, 321, 430, 430F, 2205 to cater the requirement of aerospace, energy sector, power distribution companies, oil & gas and other industries.Depending upon the clients request and standard engineering practices, our round bars are supplied as Cold Drawn, Centre less Ground & Polished, Peeled, Smooth turned or Rough turned.

Product Details:

Stainless Steel 303 Bars & Rods Ragavendra Engineering is a known manufacturer of SS 303 Round Bars, which represents the optimum in machinability among the austenitic stainless steels. 303 Round Bars is often used in Nuts and bolts, Aircraft fittings, Gears, Screws, Shafts, Electrical switchgear components, Bushings and more. Stainless Steel Din 1.4305 Round Bars offers good strength, corrosion resistance and great machinability. Stainless Steel UNS S30300 Round Bars has a higher concentration of sulfur reducing the drag on cutting tools. SUS 303 Round Bars is fairly resistant to general atmospheric corrosion, general foodstuffs, sterilizing solutions, dyestuffs, most organic chemicals, plus some inorganic chemicals. However, these Inox 303 Round Bars has very limited resistance to acids. Alloy 303 Round Bars possesses non-galling properties that make disassembly of parts easy-and help to avoid scratching or galling in moving parts.

Product Details:

Stainless Steel 321 Rod Suppliers
We are engaged in manufacturing and exporting a comprehensive range of Stainless Steel 321 Round Bars which are manufactured using high quality of raw materials. We also make sure that our 321round bars range meets the international quality standards.These Stainless Steel 321 Round Bars are renowned for their long lives, excellent quality, optimum performance, economical rates, dimensional accuracy, durability, corrosion resistance and excellent finish.These SS 321 Round Bars tested on different sorts of quality parameters and are used in diverse industries such as food industries, chemical industries , electrical industries, generator industries, shaft industries, cement industries, gas industries, power project. We always charge industry leading rates and adhere to varied customers’ demands.

Product Details:

We are the leading Supplier of Stainless Steel 303 Rods from Chennai
303 stainless steel is the most readily machinable of all the austenitic grades of stainless steel.
303 stainless steel owes its machinable nature to the presence of Sulphur in the composition. However, it should be noted that the Sulphur also decreases the corrosion resistance of the steel and slightly lowers its toughness. The toughness is still excellent as with other austenitic grades. AISI 304 stainless steel offer higher corrosion resistance than 303.

Product Details:

Stainless Steel 321 Round Rods We are engaged in manufacturing and exporting a comprehensive range of Stainless Steel 321 Round Bars which are manufactured using high quality of raw materials. We also make sure that our 321round bars range meets the international quality standards.These Stainless Steel 321 Round Bars are renowned for their long lives, excellent quality, optimum performance, economical rates, dimensional accuracy, durability, corrosion resistance and excellent finish.These SS 321 Round Bars tested on different sorts of quality parameters and are used in diverse industries such as food industries, chemical industries , electrical industries, generator industries, shaft industries, cement industries, gas industries, power project. We always charge industry leading rates and adhere to varied customers’ demands.

Product Details:

Stainless Steel Bright Bars
Ragavendra Engineering is an acknowledged player in the manufacturing and supply of stainless steel bright bars. We specialize in producing all kinds of peeled and polished bright bars in accordance with our customers’ specifications. These products find wide application in sectors such as machined components, pump shafts, valves, fasteners, machine tools, threaded bars, studs, bolts, pins, hinges and handle manufacturing.As with all the other products, these SS bright bars are produced to exacting standards and in varying thickness and diameters as required by individual clients. A rigorous quality and testing process is in place to assess and rectify any potential flaws. We have highly sophisticated inspection equipment in place to ensure that the quality of the stainless steel round bars is of the highest order.

Product Details:

'Stainless' is a term coined early in the development of these steels for cutlery applications. It was adopted as a generic name for these steels and now covers a wide range of steel types and grades for corrosion or oxidation resistant applications.
Stainless steels are iron alloys with a minimum of 10.5% chromium. Other alloying elements are added to enhance their structure and properties such as formability, strength and cryogenic toughness. These include metals such as:
Nickel Molybdenum Titanium Copper
Non-metal additions are also made, the main ones being:
Carbon Nitrogen

Product Details:

BarHot Rolled / Cold Rolled 201/301/304/316/410/430 Stainless Steel Round Bar available in diversity of sizes in Big stock, we deliver Hot Rolled / Cold Rolled 201/301/304/316/410/430 Stainless Steel Round Bar with Exceptional sizes &Quality, can supply in small or large quantity

Additional Information:

• Item Code: 303CG

Product Details:

Alloy A286 Stainless Steel is designed for applications requiring high strength and good corrosion resistance. An advantage of A286 is that it can be precipitation hardened and strengthened by heat treatments. A-286 ApplicationsA286 is used in aircraft and industrial gas turbine, super-charger components, jet engines, blades, wheels, castings, frames, fasteners, sockets, flange nuts, screws, afterburner parts. A-286 SpecificationA-286 Stainless Steel Alloy, UNS S66286, A-286 Stainless, Alloy A-286 Stainless Steel, A-286 Alloy, Grade 660, ASTM A638 (VO1.03), A453 (VO1.01), 660B