Nitronic 50 & 60 Stainless Steel rods

Product Details:

Industry Names Nitronic 50, N50, XM-19
Available Forms Nitronic 50 Round Bar, Nitronic 50 Plate, Nitronic 50 Sheet, Nitronic Welding Materials, Nitronic 50 Forgings, Nitronic 50 Pipe,
Nitronic 50 Tubing

Specifications UNS S20910
ASTM A276 ASTM A479, AMS 5764 (Bar)
ASTM A240, ASTM A412, AMS 5861 (Plate/Sheet)
SPECIALS, ASTM A312, ASTM A403, UNS S20910( Pipe & Tube)
ASTM A314 (Forgings)
AWS ER209; NACE MR-01-75 (Welding Wire)

Chemical Composition, %
Attributes Good corrosion resistance
High strength austenitic alloy Applications Pressure vessels, Heat exchangers
Marine hardware
Pump shafts

Mechanical Properties Representative Tensile Properties
digg Share
Michlin Metals, Inc.

Nitronic 50 Rods, Plate and Sheets

Product Details:

NITRONIC 50:
Nitronic 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by Types 316, 316L, 317 and 317L, plus approximately twice the yield strength at room temperatures. In addistion, Nitronic 50 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures. Unlike many austenitic stainless steels, Nitronic 50 does not become magnetic when cold worked or cooled to sub-zero temperatures. High Strength (HS) Nitronic 50 stainless steel has a yield strength about three to four times that of Type 316 stainless steel

Product Details:

Nitronic 60 Stainless Steel SupplierRagavendra Engineering offers Nitronic 60 stainless steel stock in a variety of shapes including round bars, square bars, hex bars and mill flats. Nitronic 60 is a S21800 stainless steel grade austenitic metal with versatile performance characteristics that make it suitable for a very wide range of industrial, machining, and metalworking applications. It is one of the most widely used stainless steel grades on the market, and is prized for its resistance to galling and wear.The condition-A variation of stainless steel grade S21800 has been specially processed to increase tensile and yield strength, making it suitable for deployment in conditions where added stability is needed. For industrial businesses, the primary appeal of stainless steel grade S21800 is its comparable performance, anti-galling, and reduced cost compared to high-nickel and cobalt-based alloys.

Product Details:

Specifications

Round bar steel:dia 1- 2000mm
Square-shape steel: 50mm to 600mm
Plate steel thickness:0.1mm to 800mm
Width: 10-1500mm

Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a high temperature alloy for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. The additions of silicon and manganese have given the alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness. The chromium and nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight and cost reductions.

 

Specialized high quality steel

Forging/hot rolling/ extrusion of steel

 

Specifications:

Round bar steel:dia 1mm to 2000mm

Square-shape steel: 50mm to 600mm

Plate steel thickness:0.1mm to 800mm

Width: 10mm to 1500mm

Length: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections

Product Details:

We are the leading Supplier of Stainless Steel Nitronic 600 from chennai
With our trained professionals, we are able to trade and export Stainless Steel XM-19 / Nitronic 600. These are widely used in various industries such as marine, engineering, mechanical and many more, which finds usage in various applications. These are widely acclaimed for

 

• Nitronic® 60 is known for its excellent galling resistance at elevated temperatures

 

NAS 660 (UNS S66286) - A-286 Alloy

 

We offer NAS 660 (UNS S66286) - A-286 Alloy at reasonable prices. Our clients from different verticals appreciate our products for its

 

• Rust resistance

• Long service life

• Low maintenance

• Perfect finishing

• Dimensional accuracy

 

Further, we offer and acclaimed for its

 

• A precipitation hardening stainless steel, NAS 660 (SUH 660, UNS S66286) maintains superior strength at high temperatures up to 700, surpassing austenitic stainless steels

• With a higher nickel content than SUS 304, NAS 660 also includes such elements as titanium and aluminum for hardening

• Aging treatment is used to precipitate the face-centered cubic phase—technically referred to as the γ’ or gamma prime phase [Ni3(Al, Ti)]—making this an extraordinarily strong metal at high temperatures

• Nippon Yakin supplies this product in plate, sheet and strip forms

 

Applications :

• Fasteners
• Pins and bushings
• Wear rails
• Roller bearings
• Pump components

Physical Properties :

• Density: 0.275 lb/inch3
• Electrical Resistivity: 589 ohm circ-mil/ft

Additional Information:

• Port of Dispatch: Chennai
• Delivery Time: Immediate

Product Details:

Providing Nitronic 60 stainless steel round rod, annealed, meets ASTM 276. We are competitive supply of nitronic 60, nitronic 50 from Chennai.

Available: Up to 330 MM diameter.
Delivery : By transport or courier.
Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

Product Details:

Nitronic 50 Stainless Steel Supplier in ChennaiRagavendra Engineering is a leading supplier of Nitronic 50 stainless steel with stock in a variety of shapes including round bars, square bars, hex bars and mill flats. Nitronic 50 is an XM-19 stainless steel grade that offers superior strength and corrosion resistance compared to the other common austenitic stainless steel variations. At room temperature, grade XM-19 displays double the yield strength of grades 316/316L and 317/317L along with higher levels of oxidation resistance, especially in marine applications.

Product Details:

NITRONIC 60 STAINLESS STEEL: High Performance Alloys stocks and produces this grade in the following forms: Bar, flat bar, square bar, wire spool. wire cuts, loose coil, sheet, plate, strip, coil, tube, pipe, fastener, disk, machined, billet, ingot.Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. This grade is best known for its wear and galling resistance.

Product Details:

N50 ROUND BARStainless Steel Round Bar N50 also referred to as Nitronic 50, has a combination of high strength and corrosion resistance that is not found in other commercial material in its price range. Its excellent mechanical properties make N50 round bar an improved alternative to applications where other austenitic stainless steels (300 grades) are inadequate.

Product Details:

Nitronic 60 RodWe at, Ragavendra Engineering. is one of the leading company in the field of manufacturing export quality NITRONIC 60 Rod Bar. These Rod Bar are made of using Finest Nickel Alloys. These NITRONIC 60 Rod Bar are essentially used as a Connector between the bar at the middle. They are also used as a plug in to resist pressure in Pressure Valves. These have huge demand in many large scale industrial purposes. Our NITRONIC 60 Rod Bar are one of the best selling known for its durable leak-proof property.Our teams of talented professionals are dedicated towards managing the production and export of NITRONIC 60 Rod Bar Products in a wide range. With abundant technical manpower support, we manufacturer these NITRONIC 60 Rod Bar with utmost care on the quality of the product. We are an ISO 9001:2008 registered company, and have been recognized as one of the world’s leading stockists and manufacturer of quality metals for over two decades and are committed to quick responses, unsurpassed quality, competitive pricing, reliable deliveries and an exhaustive inventory.

Product Details:

Nitronic 60 Stainless Steel Rod
Ragavendra Engineering offers Nitronic 60 stainless steel stock in a variety of shapes including round bars, square bars, hex bars and mill flats. Nitronic 60 is a S21800 stainless steel grade austenitic metal with versatile performance characteristics that make it suitable for a very wide range of industrial, machining, and metalworking applications. It is one of the most widely used stainless steel grades on the market, and is prized for its resistance to galling and wear.
The condition-A variation of stainless steel grade S21800 has been specially processed to increase tensile and yield strength, making it suitable for deployment in conditions where added stability is needed. For industrial businesses, the primary appeal of stainless steel grade S21800 is its comparable performance, anti-galling, and reduced cost compared to high-nickel and cobalt-based alloys.

Product Details:

Nitronic 60 Stainless Steel,Nitronic 60 Round Bars.Specifications Round bar steel:dia 1- 2000mm Square-shape steel: 50mm to 600mm Plate steel thickness:0.1mm to 800mm Width: 10-1500mmNitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a high temperature alloy for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. The additions of silicon and manganese have given the alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness. The chromium and nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight and cost reductions.

Nitronic 60 Round Bars / 218/ UNS S21800