Ragavendra Engineering
Ragavendra Engineering
Puzhal, Chennai, Tamil Nadu
GST No. 33ALFPG8589C1Z2
TrustSEAL Verified
Call 0804896561889% Response Rate

Ferritic Stainless Steel

Our company supply and trade Ferritic Stainless Steel to national and international market. These are widely acclaimed for its characteristics such as Corrosion resistance, quality, durability and reliability. We also supply by meeting industrial quality standards. Further, we offer wide gamut of Ferritic Stainless Steel such as Stainless Steel 440c and Stainless Steel Bar.

Stainless Steel 440c Bar

Stainless Steel 440c Bar
  • Stainless Steel 440c Bar
Get Best Quote
Approx. Price: Rs 550 / KgGet Latest Price

Product Details:

Minimum Order Quantity1 Kg
Thickness/Diameter1-2 inch, 0-1 inch
Material GradeSS440C
Steel TypeStainless Steel
Single Piece Lengh6 meter, Viraj
Surface FinishBright
Single Piece Length3 meter
Unit Length3 m, 6 m
MaterialStainless Steel, Within One Week
Surface TreatmentHot Rolled
Test CertificateAvailable
Test CertificatesAvailable
Country of OriginMade in India

Since the inception, we are trading Stainless Steel 440c to our clients from different verticals. We supply these steel with wide gamut varying in length and dimensions. We supply our product with the following


  • 440C is a high carbon chromium stainless steel providing stainless steel properties with optimum hardness after heat treatment

  • 440C can achieve a hardness of up to 60 Rockwell HRc

  • 440C stainless resists corrosion in normal domestic environments and very mild industrial environments, with optimum corrosion resistance of 440C achieved with a temper below about 400°C. For 440C to achieve best corrosion resistance, surfaces must be free of scale, lubricants, foreign particles, and coatings applied for drawing and heading

  • With its high carbon content 440C annealed stainless machines similar to a high speed steel annealed grade


Typical Analysis :

C. Mn. P. S. Si. Cr. Mo.
-0.95 1.00% 0.04% 0.03% 1.00% -16 0.75%
1.20% max. max. min. max. 18.00% max.



To achieve full annealing of 440B heat uniformly to 840 to 875°C. Soak and cool very slowly in the furnace.


To heat treat 440B heat to 1010 to 1070°C, fully soak and quench in warm oil or cool in air. Be careful not to overheat 440C or full hardness will not be obtained.

Mechanical Properties at Room Temperature
(440C hardened at 1040°C, oil quenched and tempered at 300°C)

Tensile (UTS) 1965 N/mm²
0.2% Yield Strength 1896 N/mm²
Elongation (50.8mm) 2% min
Hardness 59HRc
Reduction of Area 10

Additional Information:

  • Port of Dispatch: Chennai
  • Delivery Time: Immediate
Yes! I am Interested

Ferritic Stainless Steel 440c

Ferritic Stainless Steel 440c
  • Ferritic Stainless Steel 440c
Get Best Quote
Approx. Price: Rs 540 / KgGet Latest Price

Product Details:

Minimum Order Quantity1 Kg
Surface FinishBright
ApplicationAutomobile Industry
Material GradeSS440C

FERRITIC STAINLESS STEEL: Ferritic steels cannot be hardened or strengthened by heat treatment, but have good resistance to stress-corrosion cracking. They can be cold worked and softened by annealing. While not as strong or corrosion resistant as austenitic grades, the ferritic grades generally have better engineering properties. Though generally very weldable, some ferritic steel grades can be prone to sensitization of the weld heat-affected zone and weld metal hot cracking. Weldability limitations, therefore, restrict the use of these steels to thinner gauges.
Yes! I am Interested

Explore More Products

View All Products

Reach Us
Ganaram Ramakrishnan (Proprietor)
Ragavendra Engineering
Chennai - 600066, Tamil Nadu, India
Get Directions

Call Us

Send E-mail