Nickel Alloy

Product Details:

Cupronickel(also known ascopper-nickel) is analloyofcopperthat containsnickeland strengthening elements, such asironandmanganese. Despite its high copper content, cupronickel is silver in colour.

Due to the specific properties of nickel and copper alloys, they are applied in various domains of industry e.g. coin and medal minting, armaments manufacture, desalination materials, marine engineering, and extensively used in the chemical, petrochemical and electrical industries.

Cupronickel is highly resistant to corrosion inseawater. For this reason, it is used for piping, heat exchangers and condensers in seawater systems, marine hardware, and sometimes for thepropellers,crankshaftsandhullsof premiumtugboats,fishing boatsand other workingboats.

Another common use of cupronickel is in silver-coloured modern-circulatedcoins. A typical mix is 75% copper, 25% nickel (a proportion of 31), and a trace amount of manganese. In the past, truesilvercoins weredebasedwith cupronickel.

Product Details:

NICKEL BARS AND RODSNickel alloys are some of the few metallic materials that can be used in contact with fluorine, hydrofluoric acid, hydrogen fluorine, or other derivatives. These nickel sheets show very high resistance to caustic alkalies. Behavior in seawater is also excellent, with improved resistance to cavitation corrosion compared to copper-based alloys. It can be used in contact with dilute solutions of mineral acids, such as sulphuric and hydrochloric acids, particularly if they are air-free. However, if the alloy contains no chromium, corrosion rates may increase significantly in oxidizing conditions.

Product Details:

625 round bar inventory - AMS 5666
We supply round bar stock in .250" - 7.000" diameters. Its superior corrosion and oxidation resistance at high temperatures make it ideal for the aerospace industry, naval applications, chemical processing, and the oil and gas industries. Alloy 625 is virtually immune to corrosion in marine environments and is used extensively in the hot section of jet engines and in high temperature corrosive environments found in the chemical processing industry. Our bar stock comes in standard inventory lengths of 10-12 feet rl's. It requires a minimum yield strength of 60,000 psi at room temperature for bars under 4 inches in diameter. Mechanical properties for bars 4 inches in diameter and larger are to be agreed upon by purchaser and vendor. Exact specification is AMS 566Bar specifications
AMS 5666ASTM B 446ASME SB 446Line marked over >.500 inch diameter

Product Details:

NICKEL BAR, ROD SUPPLIERNickel alloys are some of the few metallic materials that can be used in contact with fluorine, hydrofluoric acid, hydrogen fluorine, or other derivatives. These nickel sheets show very high resistance to caustic alkalies. Behavior in seawater is also excellent, with improved resistance to cavitation corrosion compared to copper-based alloys. It can be used in contact with dilute solutions of mineral acids, such as sulphuric and hydrochloric acids, particularly if they are air-free. However, if the alloy contains no chromium, corrosion rates may increase significantly in oxidizing conditions.

Product Details:

Ragavendra Engineering is the most acclaimed manufacturer, exporter, distributor and supplier of industrial Nickel Alloy Bar with required test certificates. Our material is certified to the highest industry standards. You can also Order small quantities, we will be happy to quote best price for small and large quantities & can typically deliver the Nickel Alloy Bar in minimum time frame anywhere around the globe.Our broad product range makes your individual wishes possible and also meets the extraordinary demands.

Product Details:

Nickel Alloy Round BarsRagavendra Engineering, we maintain a strategic inventory of nickel round bars, and our nickel products are available in both random and customized sizes. Nickel alloys have a broad range of applications, and are widely used for the processing, transportation, and storage of chemicals while playing major roles in the oil, gas and petrochemical industries. These alloys are prized for their outstanding resistance to oxidation and alkaline substances, and for their excellent durability across a very broad spectrum of temperatures and environmental conditions.

Product Details:

Nickel Alloy 600 in Sheet, Plate, Bar
SPECIFICATIONS: Alloy 600 | UNS N06600| ASTM/ASME B168 / B166 | Werkstoff 2.4816

Ragavendra Engineering can supply alloy 600 from stock in sheet, plate, and bar forms. We also have the capabilities to provide cutting processes and distribute across the world.

Properties

Alloy 600 (UNS N06600) is a Ni-Cr-Fe alloy.

This alloy is characterized by:

• Good resistance to oxidation, carburisation and nitriding
• Good resistance to stress corrosion cracking, at both room and elevated temperatures
• Good resistance to dry chlorine and hydrogen chloride
• Good mechanical properties at sub-zero, room and elevated temperatures

• MORE INFO
• DESIGNATION AND STANDARDS
• MECHANICAL PROPERTIES
• APPLICATIONS

 

Chemical Composition (average %) Metallurgical Structure

Alloy 600 has a face-centred cubic structure.

Corrosion Resistance (continued)

Excellent resistance is shown in high purity water , as used in the primary and secondary circuits of some nuclear reactors.

Alloy 600 is particularly resistant to attack by dry chlorine or hydrogen chloride,
even at temperatures up to 650°C (1200°F).

At high temperatures in air the annealed and solution treated alloys show good
resistance to oxide scaling and have high strength.

The alloy also resists ammonia bearing atmospheres, as well as nitrogen and
carburising gases. Under alternating oxidising and reducing conditions this alloy
may suffer from selective oxidation (green rot).

Product Details:

Nickel Alloy 400 in Sheet, Plate, Bar
SPECIFICATIONS:
GRADE Alloy 400 | UNS N04400 | ASTM/ASME B127 / B164 | Werkstoff 2.4360

We are a stockist of alloy 400 that can be profiled and supplied in sheet, plate, and bar form meeting quality standards and requirements for many markets.

Properties

Alloy 400 (UNS N04400) is a single-phase solid-solution nickel-copper alloy with excellent corrosion resistance to a wide range of media.

This alloy is characterized by:

• Corrosion resistance in a wide range of marine and chemical environments
• Freedom from chloride induced stress-corrosion cracking
• Good mechanical properties from sub-zero temperatures up to about 550°C (1020°F)
• Approval for pressure vessels with wall temperatures from -10-425°C (14-800°F) according to VdTÜV-Wbl.263 and up to 900°F (480°C) according to ASME boiler and pressure vessel code
• Good workability and weldability

• MORE INFO
• DESIGNATION AND STANDARDS
• MECHANICAL PROPERTIES
• APPLICATIONS

 

Chemical Composition (average %) Metallurgical Structure

Alloy 400 has a face-centred cubic structure.

Corrosion Resistance

Alloy 400 has outstanding resistance to neutral and alkaline salts. It has been a standard material for salt plants for many years. This alloy is one of the few metallic materials which can be used in contact with uorine, hydrouoric acid, hydrogenuoride or their derivatives. Alloy 400 shows very high resistance to caustic alkalies. Behaviour in seawater is also excellent, with improved resistance to cavitation corrosion compared with copper-base alloys. It can be used in contact with dilute solutions of mineral acids such as sulphuric and hydrochloric acids, particularly if they are air-free. However , as the alloy contains no chromium, corrosion rates may be increased signicantly in oxidising conditions. Whilst alloy 400 can be considered immune to chloride-ion stress cracking, it can stress crack in the presence of mercury or in most aerated HF vapours. A stress relieving heat treatment is applied in such cases.

Product Details:

Nickel Alloy Plate

Nickel Aloy plates, pipes, pumps, valves, scrubbers, and other equipment components used in the marine engineering, chemical, petrochemical, hydrocarbon, thermal and food processing, oil and gas extraction, power generation, and pollution control industries are prime applications for these high-performance alloys. With over 100 pieces of plate processing equipment in-house, Sandmeyer can provide you with nearly any shape or configuration required.Nickel, long used as an alloying element in thousands of alloys, is produced by a wide range of companies worldwide. It has an excellent track record for providing corrosion resistance, high strength at high temperatures, and aesthetic beauty in a wide range of applications. Nickel alloys are used today to provide cleaner and safer transportation, to provide clean food and water, to reduce emissions to air and water, to produce more durable products, to provide clean and renewable energy, and to provide efficient shipping and communications.