Monel Stainless Steel

Product Details:

Industry NamesAlloy K-500MONELNickel K-500

Material Exotic Specialty Steel Specifications AMS 4676 ASTM B865 QQ-N-286 UNS N05500Applications Propeller and Pump Shafts Pumps and Valves Features Corrosion Resistance of Alloy 400 High Strength Corrosion Fatigue and Erosion Resistance Monel K500 or Alloy 500 is in the same nickel based family as other Monel Alloys (Monel 400 and Monel R405). Alloy K-500 is a corrosion resistant alloy similar to Monel 400 but carries with it greater hardness and strength. In addition it's makeup is mostly that of Copper and Nickel. The reason why Monel K500 has increased properties to that of Monel 400/R405 is that it also contains Aluminum and Titanium. Through their strategic addition the alloy's composition strengthens through heating under controlled conditions.
Monel K500 can go into many applications, for instance, cables, chains, fasteners, doctor blades, pulp paper processing, pump shafts in oil and gas and sensor components. Alloy 500 comes in round bar, plate and sheet.
Please contact us to request a quote. We specialize in hard to find material.
We work closely with many manufacturers in the aerospace & defense industry.

Product Details:

We are leading supplier monel K500 in variable shape and size from Chennai
Available size: 10mm to 350mm
Share:Bright, black, dull polish, Export bright
Delivery : with in a day from Chennai

Product Details:

Chemical Composition of Monel "Alloys:

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: CHENNAI
• Production Capacity: 8 TONS PER MONTH
• Delivery Time: WITH IN A DAY FROM CHENNAI

Product Details:

 

Minimum Order : Customer Requirement

Supplier ability : 500 Tons / Tons per week

Payment Terms : L/C , T/T

Material : Monel K500 Rod

Standard : ASTM / AISI / JIS / DIN / GB

Length : Cutting for customer Requirement

Hot Rolled Stainless Steel plate

Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

 

Product Details:

MONEL K500Monel K500 ® UNS N05500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of hardness and greater strength. These amplified properties, strength and hardness, are obtained by adding titanium and aluminum to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Monel K-500 has approximately three times the yield strength and double the tensile strength when compared with Monel 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
The corrosion resistance of monel K-500 is substantially equivalent to that of alloy 400 except that when in the age-hardened condition, nickel monel K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel K-500 has been found to be resistant to a sour-gas environment. The combination of very low corrosion rates in high-velocity sear water and high strength make monel K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.
Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.
Available forms are Monel K500 Seamless Pipe, Monel K500 Welded Pipe,Monel K500 Seamless Tube, Monel K500 Welded Tube,Monel K500 Round Bars,Monel K500 Wire, Monel K500 Sheet, Monel K500 Plate,Monel K500 Forgings,Monel K500 Pipe Fittings and Monel K500 Flanges.

Product Details:

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or Monel K-500 Barsbright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Product Details:

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

Product Details:

MONEL ALLOY 400Monel 400 FlangesMonel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Product Details:

Monel 400/K500 Round Rods
Ragavendra Engineering is one of the prime manufacturers of Monel 400 / K500 Round Bars, Rods that are being sourced by using high quality of raw material and makes sure to provide durability of highest quality of industry standard products. Monel 400 Round Bars is a rock-solid solution alloy that can merely be toughened by cold working. Also Monel 400 Rods shows properties such as good weldability, high strength and good corrosion resistance. Improved characteristics of hardness and strength of Monel K500 Round Bars and Monel K500 Rods are acquired by the addition of titanium and aluminum to the nickel-copper base and also by a thermal doling out used to upshot precipitation, which is normally called as aging or age-hardening. Also known as UNS N04400 and UNS N05500, these Alloy 400 Bars and Alloy K500 Bars respectively can further be customized in terms of sizes and thicknesses as per specific requirements given by our esteemed clients. We offer these round bars and rods in market leading prices.

Product Details:

Minimum Order : Customer Requirement

Supplier ability : 500 Tons / Tons per week

Payment Terms : L/C , T/T

Material : Monel K400 Rod

Standard : ASTM / AISI / JIS / DIN / GB

Length : Cutting for customer Requirement

Hot Rolled Stainless Steel plate

Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

Product Details:

Monel Alloy 400/K500 Round Bars & Rods
As a tremendously respected association in the business sector, we as Ragavendra Engineering are very occupied with proposing a gathering of Monel Alloy 400/K500 Round Bars & Rods as an exporter, producer, supplier, and stockiest to our overall customers at sensibly estimated costs. Likewise alluded as UNS N04400/N05500 Round Bars & Rods, Monel is a strong arrangement parallel combination. As nickel and copper are commonly dissolvable in all extents, it is a solitary stage combination.
Monel Alloy 400/K500 Round Bars & Rods has an exact gravity of 8.80, a liquefying scope of 1300 Deg C - 1350 Deg C, an electrical conductivity of around 34% IACS, and (in the toughened condition) an unbending nature of 65 Rockwell B. In the mean time, we too offer these Monel Alloy 400/K500 Round Bars & Rods (otherwise called UNS N04400/N05500 Round Bars and Rods)in altered thicknesses and sizes according to the exact necessities given by our important clients in universal nature of principles.

Product Details:

We supply Stainless Steel - Monel K 500 to our clients from different verticals. Our company supply by meeting both national and international quality standards. Further, we offer these with

 

• Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®

• The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments

• Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges

Chemical Analysis:

Additional Information:

• Port of Dispatch: Chennai
• Delivery Time: Immediate

Product Details:

Monel K500 RodMonel K500 is a nickel-copper alloy combination with Aluminum and Titanium added to the base that is strengthened to mould into desired products. Ragavendra Engineering is a leading supplier and exporter of Monel K500 Round Bar. We provide Monel Alloy K500 Round Bar which are available to our clients at reasonable rates. Monel Alloy K500 Round Bar comes in sizes from 8mm to 300mm.Nickel ALloy 200 Round Bars are available in different types such as Monel Alloy K500 Round Bars (ASTM B 865), Monel Alloy K500 Round Bars & Bars Exporter in Mumbai, India, 400 Monel Alloy Round Bars, Monel Alloy UNS N05500 Round Bars & Bars, Monel Alloy K500 Bright Bar & Rods, Monel Alloy DIN 2.4375 Round Bars & Rods, Monel Alloy UNS N05500 Bars, Monel Alloy K500 Polish Bars, Monel Alloy K500 Black Bar, Monel Alloy K500 Forged Round Bar ExportersConsidered one of the conspicuous company for Monel Alloy K500 Round Bars , we are included in offering an extensive variety of Monel Alloy K500 Round Bars. Because of its imperviousness to decay, Monel Alloy K500 Round Bars (UNS N05500) is regularly utilized as a part of parts found in marine and concoction situations.Monel Alloy K500 Round Bar have various applications like Truck trailers, bus body, Tippers, Railways, escalators and elevators, Scaffolding manufacturers, Earthing material, Base plates, Ship building, flanges, clamps, washers and a lot of more engineering industries. Stainless steel Polish bar is an important process for architectural and productions applications.