17.4ph Stainless Steel

Product Details:

17-4 PH - Precipitation Hardened Stainless Steel17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize war page and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy Specifications17-4 PH17-4 SS17-4 Stainless Steel AISI 630AISI Type 630AISI Type S17400PH 17-4UNS S17400Alloy UNS S17400Custom 630Grade 630Type 63017Cr-4Ni17Cr-4Ni-3CuX5CrNiCuNb17-4-4Stainless Steel 17Cr-4NiVIRGO 17.4 PH AMS 5604AMS 5643AMS 7474ASME SA 705ASTM A 564ASTM SA 564ASTM A 693ASME SA 693ASTM A 705
Wire Flat Wire Round Wire Special Wire Shapes Square Wire
Custom Shapes Forgings
INVENTORY FORMS
Rod, Flats, Square, Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.17-4 PH sheet sizes: 17-4 PH Sheet Sizes Compliance: Metals distributed by Ragavendra Engineering.

Product Details:

17-4 PH - Precipitation Hardened Stainless Steel17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy Specifications17-4 PH17-4 SS17-4 Stainless SteelAISI 630AISI Type 630AISI Type S17400PH 17-4UNS S17400Alloy UNS S17400Custom 630Grade 630Type 63017Cr-4Ni17Cr-4Ni-3CuX5CrNiCuNb17-4-4Stainless Steel 17Cr-4NiVIRGO 17.4 PH AMS 5604AMS 5643AMS 7474ASME SA 705ASTM A 564ASTM SA 564ASTM A 693ASME SA 693ASTM A 705
Wire Flat Wire Round Wire Special Wire Shapes Square Wire
Custom Shapes Forgings
INVENTORY FORMS
Rod, Flats, Square, Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.17-4 PH sheet sizes: 17-4 PH Sheet Sizes Compliance: Metals distributed by Ragavendra Eingineerng.

Product Details:

17-4 PH - Precipitation Hardened Stainless Steel17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy Specifications17-4 PH17-4 SS17-4 Stainless SteelAISI 630AISI Type 630AISI Type S17400PH 17-4UNS S17400Alloy UNS S17400Custom 630Grade 630Type 63017Cr-4Ni17Cr-4Ni-3CuX5CrNiCuNb17-4-4Stainless Steel 17Cr-4NiVIRGO 17.4 PH AMS 5604AMS 5643AMS 7474ASME SA 705ASTM A 564ASTM SA 564ASTM A 693ASME SA 693ASTM A 705
Wire Flat Wire Round Wire Special Wire Shapes Square Wire
Custom ShapesForgings
INVENTORY FORMS
Rod, Flats, Square, Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.17-4 PH sheet sizes: 17-4 PH Sheet SizesCompliance: Metals distributed by Ragavendra Eingineerng.

Product Details:

17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.
Best Stainless offers high quality standards including: UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.
17-4 PH stainless steel can be used for a variety of applications including: pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, columbian tantalum, copper, manganese, nickel, phosphorous, silicon, and sulfur.

Product Details:

17-4 PH is a martensitic precipitation- hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance,good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time,low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metal working industries.
Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance.Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.The grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to Alloy 304 or 430.

Product Details:

Chemical FormulaFe, <0.07% C, 15-17.5% Cr, 3.0-5.0% Ni, <1.0% Mn, <1% Si, <0.040% P, <0.03% S, 3.0-5.0% Cu, 0.15-0.45% Nb+Ta

IntroductionGrade 630 stainless steels are martensitic stainless steels that are precipitation hardened to achieve excellent mechanical properties. These steel achieve high strength and hardness following heat treatment. The heat and corrosion resistance of grade 630 are similar to that of grade 304 steels. This grades is also commonly referred to as grade 17-4PH.
One of the key benefits of this grade is that it is available in solution treated conditions, at which they can be easily machined and age-hardened to attain high strength. The age treatment of grade 630 is carried out at low temperatures, to avoid significant distortion. Therefore, this grade is used for applications such as the manufacture of long shafts that do not require re-straightening after heat treatment.
Key PropertiesThe properties mentioned below pertain to commonly available grade 630 bar products in ASTM A564. The specifications may not be similar to other forms such as forgings and plates.

Product Details:

Quick Details Packaging & Delivery Specifications

1.17-4 ph stainless steel,thickness: 0.1~15mm
2.Ensure quality,timely delivery
3.2B finish
4.Tolerance: -0.01mm

Product Details:

Product Details:

Stainless Steel 15-5 PH*15-5 PH is a high strength stainless steel and hardness with excellent corrosion resistance. Stainless Steel 15-5 PH can be age- Hardened by a low temperature treatment. Stainless Steel 15-5 PH has been used for applications for requiring high strength and toughness, such as valve parts, fitting, and fasteners, gears, engine parts, paper mill equipment, and aircraft components. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges. Specifications:AMS 5658, AMS 5659, AMS 5862, ASTM A564 XM-12,

Product Details:

17-4PH Stainless Steel combines high strength, hardness (up to 572°F / 300°C), and moderate corrosion resistance. Alloy 17-4 PH withstandscorrosive attacks better than any of the standard hardenable stainless steels and is comparable to Alloy 304 in most media. The alloy is subjectto crevice or pitting attack if exposed to stagnant seawater for any length of time, although It is corrosion resistant in some chemical, petroleum,paper, dairy and food processing industries (equivalent to 304L grade).Mechanical properties can be improved (high strength and superior corrosion resistance) when precipitation hardened from Condition A toone of the Condition H tempers. We supply 17-4 PH in the H1150D condition. This is double aged at a temperature between 1140° F and1160° F for 3.75 hours to 4.25 hours, with the second ageing being used to bring down the hardness value.

Product Details:

17.4ph Stainless Steel Round Bar Suppliers In Chennai17.4Ph Stainless steel Round Ragavendra Engineering iS Supplier 17-4 PH - Precipitation Hardened Stainless Steel17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy Specifications17-4 PH17-4 SS17-4 Stainless SteelAISI 630AISI Type 630AISI Type S17400PH 17-4UNS S17400Alloy UNS S17400Custom 630Grade 630Type 63017Cr-4Ni17Cr-4Ni-3CuX5CrNiCuNb17-4-4Stainless Steel 17Cr-4NiVIRGO 17.4 PH AMS 5604AMS 5643AMS 7474ASME SA 705ASTM A 564ASTM SA 564ASTM A 693ASME SA 693ASTM A 705WireFlat Wire Round Wire Special Wire Shapes Square Wire Custom Shapes Forgings INVENTORY FORMS Rod, Flats, Square, Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.17-4 PH sheet sizes: 17-4 PH Sheet Sizes Compliance: Metals distributed by Ragavendra Eingineerng.

Product Details:

17.4PH Stainless Steel Rods Suppliers in Chennai. Ragavendra Engineering 17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination ofhigh strength, good corrosion resistance,good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and short time,low-temperature heat treatments that minimize war page and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, foodprocessing, paper and general metalwork ingindustries.

Product Details:

17-4 PH is a chromium-nickel grade of stainless that may be hardened by a single low temperature precipitation-hardening heat treatment. Excellent mechanical properties at a high strength level may be obtained by such treatment. Scaling and distortion is minimized. 17-4 PH should not be used in the solution treated condition. The strength and corrosion resistance properties of 17-4 hold up well is service temperatures up to 800 F. Fabrication techniques for this steel is similar to those established for the regular stainless grades. 17-4 machines well, has excellent welding characteristics, and forges easily.

Product Details:

17-4 PH - Precipitation Hardened Stainless Steel17-4 PH is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. Alloy Specifications17-4 PH17-4 SS17-4 Stainless SteelAISI 630AISI Type 630AISI Type S17400PH 17-4UNS S17400Alloy UNS S17400Custom 630Grade 630Type 63017Cr-4Ni17Cr-4Ni-3CuX5CrNiCuNb17-4-4Stainless Steel 17Cr-4NiVIRGO 17.4 PH AMS 5604AMS 5643AMS 7474ASME SA 705ASTM A 564ASTM SA 564ASTM A 693ASME SA 693ASTM A 705
WireFlat WireRound WireSpecial Wire ShapesSquare Wire
Custom ShapesForgings
INVENTORY FORMS
Rod, Flats, Square, Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.17-4 PH sheet sizes: 17-4 PH Sheet SizesCompliance: Metals distributed by Ragavendra Eingineerng.