Duplex Stainless Steel

Product Details:

Ferralium 255 – SD50 (UNS S32550)Ferralium® 255 – SD50 (super duplex 255) is a super duplex stainless steel supplied in the hot worked and annealed condition. It achieves higher strengths than most stainless steels and alternative corrosion resistant alloys, offering the potential to reduce section size and therefore weight and cost.

As a 25% Cr alloy, with significant additions of copper, Ferralium® 255 offers excellent corrosion resistance in a wide variety of corrosive chemicals including sulphuric, nitric and phosphoric acid. In seawater and other chloride containing environments it also provides outstanding resistance to pitting and crevice corrosion, with Critical Pitting Temperature exceeding 50°C. Excellent ductility and impact strength at both ambient and sub-zero temperatures combine with a high resistance to abrasion, erosion and cavitation erosion.

Product Details:

Super Duplex - UNS 32750 Stainless Steel Pipes And Tubes is one of the widely acclaimed product in our company. We offer this with the following parameters NS S32750, F55, 1.4501 Super Duplex has enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex typesThis is due to the further additions of chromium, molybdenum, and nitrogen to these gradesUNS S32760, F55, 1.4501 combines high strength and good ductility with outstanding corrosion resistance. With UNS S32750, F55, 1.4501 having these attribute it is used in a wide range of marine, oil and gas environmentsUNS S32750, F55, 1.4501 is the most common super duplex grade Typical analysisC.Cr.Cu.Mn.Mo.N.Ni.P.S.Si.W.0.03$.00-0.50-1.00%3.00-0.20-6.00-0.035%0.015%1.00%0.50-max26.00%1.00%max4.00%0.30%8.00%maxmaxmax1.00%Minimum Mechanical Properties at Room Temperature(EN10088-3 1.4501 UNS S32760 F55 160mm dia max - solution treated) Tensile (UTS)730 - 930 N/mm² 0.2% Proof Stress530 N/mm² Min Elongation 25% min Hardness290HB Max Impact100J

Additional Information:

• Port of Dispatch: Chennai
• Production Capacity: 10 TON per month
• Delivery Time: Immediate
• Packaging Details: P&F at 2% from sub total

Product Details:

We are the Leading supplier from Chennai, Tamilnadu for the following Grades UNS 32750, UNS 32760, S31803, S32205, S32207. We offer wide gamut of Duplex Stainless Steel to our clients from different verticals. Our company offers according to custom made in compliance with national and international quality standards.

Product Details:

DUPLEX 2205ASTM A 182, A 240, A 276,
A 789, A 790, A 815
UNS S31803, S32205
NACE MR0175

Forms of Duplex 2205 Available at Mega Mex

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Welding Wire and Welding Electrode

2205 Duplex Overview

Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels.

The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance).

Usage of 2205 Duplex stainless steel should be limited to temperatures below 600° F. Extended elevated temperature exposure can embrittle 2205 stainless.

Corrosion Resistance

2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.

The combination of chromium, molybdenum and nitrogen convey the good resistance of 2205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of 2205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.

Chemical Composition, %

 

Mechanical Properties

Specified Tensile Properties ASTM A240

Product Details:

With our trained professionals, we supply Duplex Stainless Steel 329. Our company offers this with the following

 

• Duplex Stainless Steel 329 was one of the earliest duplex steel which is reflected in its higher permitted carbon content

• Its resistance to pitting (PREN about 32) and to crevice corrosion is below that of super duplex steels, therefore use in seawater is limited

• Exposure to moderate and high temperature and less rapid cooling may cause embrittlement

• Accordingly, design stress values in ASME II do not extend above 260°C for S32900

• Impact values are high at room temperature. However, the proportion and orientation of ferrite in welds and base material may significantly affect toughness at subzero temperatures

 

Additional Information:

• Item Code: duplex
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: chennai or mumbai
• Delivery Time: Immediate

Product Details:

Our company trade Duplex UNS- S31803 Sheet Plate Pipe Tube Bar. We also offer standard and custom made by meeting national and international quality standards.

Features

• UNS S31803, F51, 1.4462 duplex stainless steel is designed to combine improved resistance to stress corrosion cracking, pitting, crevice corrosion and high strength when compared with other stainless alloys

• Duplex UNS S31803, F51, 1.4462duplex alloy resists chloride environments and sulphide stress corrosion

• Duplex UNS S31803, F51, 1.4462 is also roughly double the strength of standard austenitic stainless steels

• These attributes mean that Duplex UNS S31803, F51, 1.4462 can be used successfully as an alternative to standard stainless steel specifications in applications where higher strength and resistance to stress corrosion cracking is required

• Duplex UNS S31803, F51, 1.4462 is also referred to as 2205.

• When machining UNS S31803, F51, 1.4462 turning feeds above 0.25mm are recommended whenever possible and SNMG120408 carbide tools are advised for optimum chip breaking of this duplex stainless steel specification

• For drilling of UNS S31803, F51, 1.4462, high pressure lubrication is recommended and coated carbide tools are preferred

 

Minimum Mechanical Properties at Room Temperature
(EN1008-3 1.4462 UNS S31803 F51 160mm dia max - solution treated)

Additional Information:

• Port of Dispatch: Chennai
• Delivery Time: Immediate

Product Details:

We are of the outstanding exporters of Super Duplex - UNS 32760 Seamless Pipes in India. Our company also offers these at competitive prices by meeting industrial quality standards.

Characteristics

• NS S32760, F55, 1.4501 Super Duplex has enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types

• This is due to the further additions of chromium, molybdenum, and nitrogen to these grades

• UNS S32760, F55, 1.4501 combines high strength and good ductility with outstanding corrosion resistance

• With UNS S32760, F55, 1.4501 having these attribute it is used in a wide range of marine, oil and gas environments. UNS S32760, F55, 1.4501 is the most common super duplex grade

Minimum Mechanical Properties at Room Temperature

(EN10088-3 1.4501 UNS S32760 F55 160mm dia max - solution treated)

Additional Information:

• Port of Dispatch: Chennai
• Delivery Time: Immediate

Product Details:

Minimum Order : Customer Requirement

Supplier ability : 500 Tons / Tons per week

Payment Terms : L/C , T/T

Material : Duplex Rod

Standard : ASTM / AISI / JIS / DIN / GB

Length : Cutting for customer Requirement

Hot Rolled Stainless Steel plate

Payment : Usually 30% of the amount by T/T as deposit and the balance money show be paid by T/T after got the taxed B/L or L/C.

Product Details:

Duplex 2205 Stainless Steel
Ragavendra inventory now includes Duplex 2205 (UNS S32205 / S31803), in sheet, sheet coil, plate, plate coil, round bar, processed flat bar and tubular products. Duplex 2205 is ideally suited for high-pressure and highly corrosive environments
General Properties
Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It also demonstrates good fatigue strength, as well as outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion in severe environments.
Applications:
Chemical processing, transport and storage – pressure vessels, tanks, piping, and heat exchangersOil and gas exploration and processing equipment – piping, tubing, and heat exchangersMarine and other high chloride environmentsEffluent scrubbing systemsPulp and paper industry – digesters, bleaching equipment, and stock-handling systemsCargo tanks for ships and trucksFood processing equipmentBiofuels plantsStandards:
ASTM/ASME: A240 UNS S32205/S31803EURONORM: 1.4462 X2CrNiMoN 22.5.3AFNOR: Z3 CrNi 22.05 AZDIN: W.Nr 1.4462

Corrosion Resistance:
Due to its high chromium, molybdenum, and nitrogen content, Duplex 2205 demonstrates superior corrosion resistant properties to 316 and 316L in most environmentsChromium, molybdenum, and nitrogen content also provide high resistance to pitting and crevice corrosion, even in oxidizing and acidic solutionsResistant to chloride stress corrosion cracking and temperatures of up to about 302°F (150°C)The presence of ferrite provides for good performance of Duplex 2205 in caustic environmentsHeat Resistance:
Similar to other duplex stainless steels, Duplex 2205 has good oxidation resistance at high temperaturesSubject to embrittlement when exposed to temperatures above 572°F (300°C) even when exposed for short periods of time; Duplex 2205 is therefore not recommended for use above 572°F (300°C)

Product Details:

ASTM A815 ~ S31803Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels. This combination of properties can mean some compromise when compared with pure austenitic and pure ferritic grades. Duplex stainless steels are in most cases, tougher than ferritic stainless steels. Strengths of duplex stainless steels can in some cases be double that for austenitic stainless steels.Whilst duplex stainless steels are considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels. However, the corrosion resistance of the least resistant duplex stainless steels is greater than that for the most commonly used grades of stainless steels, i.e. 304 and 316.Duplex steels are also magnetic, a property that can be used to easily differentiate them from common austenitic grades of stainless.Property data given in this document is typical for flat rolled products covered by ASTM A240/A240M. ASTM, EN or other standards may cover products sold. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this datasheet.

Product Details:

Duplex 2205 Stainless Steel Rod
Ragavendra Engineering offers a wide range of Duplex and Super Duplex Stainless Steel Round Bars, which is being made under the leadership of our accomplished specialists who make sure to use improved techniques and latest machines in the manufacturing procedure. Made in consistency by means of the generally defined quality norms and standards, our supplied Duplex Steel Square Bars are ensured for their unified finish and design. We as well offer these products in different grades such as Duplex Round Bars, Duplex Round Bars, Super Duplex Round Bars, and Super Duplex Round Bars. Meanwhile, these Super Duplex Steel Flat Bars are also being offered in different sizes and shapes to our customers. Duplex Steel Threaded Bars uses a chloride acetic acid solution saturated with hydrogen sulphide, where we also offer the same at best prices. The performance of welds in Super Duplex Steel Hollow Bars will depend on the weld microstructure and filler metal. Duplex Steel Hexagonal Bars is included in Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment. Solution annealed Super Duplex Steel Triangular Bars and cold worked are acceptable for use at any temperature up to 450 Degree F (232 Degree C) in sour environments if the partial pressure of hydrogen sulphide does not exceed 0.3 psi, the yield strength of the material is no greater than 160 ksi, and if its hardness is not greater than 36 HRC.

Product Details:

SpecificationsDuplex stainless F51 round bar 1.Duplex stainless F51 round bar 2.Forged 2205 S31803 F51 round bars 3.Duplex 1.4462/F51 bar
Duplex stainless F51 round bar


Forgings
Steel forgings, forged flanges, forged, rings, forged bar, ring forgings, forging supplier,
forged pipe fittings, forged flange, stainless forgings, duplex forgings, nickel alloy forgings,
forged fittings, forged bars, forged steel fittings, nickel alloys
Products
Flange, bar, pipe fittings, ring, rings, bars, flanges
Standard
ANSI B16.5,ANSI B16.47A, ANSI B16.47B, API 6A, API 6B, API 6BX, DIN, BS4504, ASTM A182
Size
1/2'~60'
Class Rating
150~20000
Surface
Bring surface; black surface; polished surface
Carbon steel

Product Details:

Our duplex Stock is unmatched in the industry and our offering covers a full palette of duplex stainless steels for use in diverse industries and applications. The high mechanical strength of duplex grades is a result of the duplex microstructure and the alloying with nitrogen. This high strength gives opportunities for reducing both weight and cost as a thinner material can be used. Low nickel content of the duplex grades makes them price stable.The duplex grades LDX 2101® and 2304 are referred to as lean duplex grades. Typical applications are storage tanks, bridges, water heaters and reinforcement bars. The corrosion resistance is comparable to the standard austenitic grades like 4301 and 4404 respectively or high alloyed ferritics like 4521.Grades 2507 and 4501 are regarded as super duplex grades. They are highly alloyed and have a corrosion resistance comparable to high performance austenitics like 254 SMO®. Typical applications for super duplex are desalination plants, seawater systems, flue-gas cleaning, umbilicals, storage tanks and pressure vessels.By lowering total material weight, you also lower transportation and assembly costs, reducing environmental impacts even further – making duplex stainless steel a genuine material of the future.

Product Details:

Duplex Steel Pipes
Our wide range of Duplex Steel Pipes is further used in various, industrial and commercial purposes.
Specifications :Standards : ASTM I ASME SA 790.

Duplex Steel Pipes Type :Seamless I ERW I Welded I Fabricated
Length :Single Random, Double Random & Cut Length
End:Plain End , Beveled End , Threaded.

Product Details:

Ragavendra engineering are Manufacturers,Supplier and Exporters of Super Duplex Steel UNS S32750 Round Bars & Rods

• Super duplex A276 Round Bars, S32750 steel rods, S32750 forged Bars, super duplex S32750 Hot Rolled Bars, Uns s32750Round Bars in Chennai.
• Super Duplex UNS S32750 Round Bars & Rods Specification:
• Grade: Super Duplex Steel UNS S32750
• Designation: ASTM A276, ASME SA276
• Diameter: 5mm to 500mm Diameter
• Length: 100 to 6000mm Length
• Bar Finishing: Bright, Polish & Black
• Form: Round Bar, Square Bar, Hex Bar (A/F), Bush Bar, Rectangle Bar, Flat Bar,
• Length: single Random, Double Random & Cut Length
• Rods: 4mm to 350mm dia, wires- 0.5mm to 10mm dia

Product Details:

Super Duplex 32750 in Sheet, Plate, BarSPECIFICATIONS: GRADE Super Duplex | UNS S32750 | ASTM/ASME A240 / F55 | Werkstoff 1.4410Ragavendra Engineering are a stockholder of the 32750 duplex alloys in sheet, plate, and round bar with the added capability of cutting processes to meet requirements across a number of industries. The following are the properties of 32750 super duplex:Ferritic-Austenitic stainless steel.Excellent corrosion resistance against general corrosion, stress corrosion cracking, corrosion fatigue, pitting, crevice and erosion corrosion and possessing very high mechanical strength properties.Good weldability, post weld heat treatment not necessary.Max. Temperature for long periods of service: 280°C (536°F) / (300°C/572°F possible for short periods).Surface condition for optimum corrosion resistance: pickled or machined.ApplicationComponents in offshore, waste water, sea water desalination and chemical plants with aggressive chloride-containing media e.g. heat exchangers, compressor and pump components. Technical info mechanical properties height temperature properties physical propertiesChemical Composition (average %)CSiMnCrMoNiCuNPREN0.0200.250.5525.803.407.00max. 0.500.30Min. 40 StandardsUNS S32750Hot FormingForging1200 to 950°C / Air coolingHeat TreatmentSolution annealing:1150 to 1000°C (2102-1832°F)Air coolingHeat TreatmentSolution annealing / quenching:1100°C (2012°F)Water , air (thickness below 2mm)Structure as quenched:Ferrite + AusteniteWeldingWeldability of super duplex 32750 is good. The welding procedures are similar to those applied for conventional duplex grades. Welding consumables for different welding methods are available.

Product Details:

Description

303 is a free machining austenitic stainless steel. With the addition of sulfur, this non-magnetic stainless steel allows for smooth, high speed machining. 303 has good corrosion resistance and is used for applications that must have a good deal of machining.

Industry Names

303 Stainless, 303

Available Forms303 Round Bar, 303 Flat Bar, 303 Hex Bar, 303 Plate, 303 Sheet, 303 Coil, 303 Welding Materials, 303 Pipe, 303 Tubing
SpecificationsUNS S30300 (303 Bar)
AMS 5640 Type 1 (303 Bar)
ASTM A582 (303 Bar)
Chemical Composition, %
Attributes

Great Machinability
Good Corrosion Resistance

ApplicationsShafts
Valve Bodies
Food Industry Applications
Physical PropertiesDensity: 0.285 lb/inch3
Melting Range: 2550-2590°F
Poisson's Ration: 0.3
Electrical Resistivity: 433Ohm-circ mil/ft

Mechanical PropertiesRepresentative Tensile Properties