304 304L Stainless Steel Round bars

Product Details:

RAGAVENDRA ENGINEERING

(CHENNAI)

TECHNICAL SPECS.

Item: Rod Stock.

Material: Stainless Steel.

Alloy Type : 316l.

Diameter: 3mm to 350mm Diameter Tolerance: +/- 0.04mm

Length: 6Meter Length Tolerance: +/- 150mm

Finish: Polished Bright

Temper: Cold finished / annealed

Chemical Formula

Fe, <0.03% C, 16-18.5% Cr, 10-14% Ni, 2-3% Mo, <2% Mn, <1% Si, <0.045% P, <0.03% S

Background

Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

 

Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti.

The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Key Properties

These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.

Corrosion Resistance

Excellent in a range of atmospheric environments and many corrosive media - generally more resistant than 304. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures, reducing to about 500mg/L at 60°C.

316 is usually regarded as the standard “marine grade stainless steel”, but it is not resistant to warm sea water. In many marine environments 316 does exhibit surface corrosion, usually visible as brown staining. This is particularly associated with crevices and rough surface finish.

 

Heat Resistance

Good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C. Continuous use of 316 in the 425-860°C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 316L is more resistant to carbide precipitation and can be used in the above temperature range. Grade 316H has higher strength at elevated temperatures and is sometimes used for structural and pressure-containing applications at temperatures above about 500°C.

Heat Treatment

Solution Treatment (Annealing) - Heat to 1010-1120°C and cool rapidly. These grades cannot be hardened by thermal treatment.

 

Applications

Typical applications include:

Food preparation equipment particularly in chloride environments.

Laboratory benches & equipment.

Coastal architectural panelling, railings & trim.

Boat fittings.

Chemical containers, including for transport.

Heat Exchangers.

Additional Information:

• Pay Mode Terms: Other
• Port of Dispatch: chennai
• Production Capacity: always ex-stock
• Delivery Time: with in a day
• Packaging Details: as per your requirement.

Product Details:

ASTM A276 Stainless Steel 316L Round Bars, RodsSS 316L Round Bars, Stainless Steel UNS S31603 Rods, SS 316L Hex Bars, Stainless Steel 316L bar & rods, SS 316L Bright Bars Supplier.
SS 316L DIN 1.4404 / 1.4435 Bars & Rods, Stainless Steel 316L Black Round Bar, SS 316L Polish Bar, SS 316L Flat Bar Exporter.
Ragavendra Engineering is one of India’s leading manufacturers of high quality Stainless Steel 316L Round Bars, Rods which find application across diverse sectors. If you are looking for a grade of austenitic stainless steel that would be optimal for machining, 316L Stainless Steel Round Bars and Rods has the compositional properties that make it the ideal candidate. SS 316L Round Bars is especially optimum for extensive machining practices because of the increased level of sulphur present in its composition. These SS 316L Rods has relatively okay corrosion resistance, however because of presence of sulphur, considerably less resilient compared to grade 316. Also known as UNS S31603, these SS 316L Seamless Bars is not affected and cannot be hardened by thermal/heat treatment. We offer qualitative Stainless Steel 316 Welded Tubes in different sizes and shapes that are being designed as per the national and international standard quality of raw materials.

Product Details:

Stainless Steel Bright BarsRagavendra Engineering is an acknowledged player in the manufacturing and supply of stainless steel bright bars. We specialize in producing all kinds of peeled and polished bright bars in accordance with our customers’ specifications. These products find wide application in sectors such as machined components, pump shafts, valves, fasteners, machine tools, dairy equipment, surgical & medical parts, threaded bars, studs, bolts, pins, hinges and handle manufacturing.
As with all the other products, these SS bright bars are produced to exacting standards and in varying thickness and diameters as required by individual clients. A rigorous quality and testing process is in place to assess and rectify any potential flaws. We have highly sophisticated inspection equipment in place to ensure that the quality of the stainless steel round bars is of the highest order. Some of the important characteristics and attributes of these products are listed as under:

Product Details:

Stainless Steel 304/304L plates
Stockholder, Suppliers of 304/304L Stainless steel Plate
'Yes, it's Stock and Ready to delivery"
High Quality lower cost but the best service in stainless steel plste.

Ragavendra Engineering is a full line distributor processor and supplier of ASTM A240 304 stainless steel Plate in Tamilnadu and india. We can supply cut to size 304 stainless steel Plate, with both narrow and wide widths, our stock of ASTM A240 304 Stainless steel Plate includes Thickness of 6mm up to 100mm with of 1250mm, 1500mm,2000mm,2500mm,3000mm.
* Order large or small Quantity of 304 stainless steel plate
* Cut to size 304 stainless steel plate
* No minimum Order Quantity 304 stainless steel plate

Brand: INDIAN ORGIN(JINDAL STAINLESS)
KOREAN ORGIN (POSCO)
EUROPEAN ORGIN (VDM, NIPPON METAL)

Product Details:

We Manufacturers an assortment of SS 316L Round Bar that is procured from trusted manufacturers across the country. This SS 316L Round Bar fined extensive application in diverse industries. The entire range has received huge appreciation for their exclusive Features such as durability, corrosion resistance and high tensile strength. We stock this SS 316L Round Bar in various specifications to fulfill every requirement of our clients’. They are impressive in terms of quality and are well made. These SS 316L Round Bar materials used in its making has been approved by professionals as they are functional and practical. The sturdy built is unmatchable and is cherished widely by clients indulged in this field. We adheres to all the norms set by the market and avail up to the mark products.

Product Details:

Ragavendra Engineering

          (CHENNAI)

 

TECHNICAL SPECS.

Item:  Rod Stock.

Material:  Stainless Steel.

Alloy Type : 303.

Diameter: 3mm to 350mm          Diameter Tolerance: +/- 0.04mm

Length: 6Meter                              Length Tolerance: +/- 150mm

Finish: Polished Bright

Temper: Cold finished / annealed

Typical Tensile strength (PSI): 90000

Typical Yield strength (PSI): 35000

Typical Hardness: 160

Hardness scale: BHN

Standards: ASTM A 582, ASTM A 484,AMS 5640T, TYPE 1, AISI 303, UNS S 30300.